Waste tyre recycling pyrolysis plant
The advent of cars has greatly promoted the development of society and improved the quality of our life. But on the other hand, the waste tires produced by automobiles pose a huge threat to our living environment. DoingGroup has developed a waste tyre recycling pyrolysis plant, the pyrolysis plant is the use of high temperature cracking chemical reactions, the waste tires cracked into fuel, carbon black, steel wire, combustible gas process.
The working principle of the waste tyre recycling pyrolysis plant is to decompose the waste tire into fuel oil, carbon black, steel wire and combustible gas by using the pyrolysis plant principle. Specific workflow is as follows:
1. The waste tires into the automatic push device, into the reactor.2. Through natural gas or heavy oil and other combustibles, heating the reactor, such as temperature reaches a certain level, we can crack the tire, separating the oil and gas and steel wire.
3. Cracked hydrocarbons through the condensing system, liquefied into heavy oil, into the tank. Some are not liquefied will be filtered again through the condensing system.
4. After the dust deodorant device, is the ultimate fuel.
5. The reactor cooled to 40 degrees below, remove the wire and carbon black.
The main advantages of DoingGroup's waste tyre recycling pyrolysis plant are as follows:
Safety:
1. Automatic welding, improve work efficiency, ensure machine quality, avoid accidents.
2. Special design to avoid paper jam caused by X-ray inspection and ensure safe operation.
3. The vacuum system ensures that the entire production line runs well.
Environmental protection:
1. Dust removal and sulfur removal system to remove smoke and sulfur.
2. Exhaust gas (including methane to butane) will be directly recycled to the fuel furnace without gas pollution.
High oil yield:
1. Three cooling processes to ensure full liquefaction of oil and gas.
2. The catalyst chamber ensures complete pyrolysis of the feedstock.
Long lasting:
1. Special boiler plate: 16mm thick Q245R.
2. Automatic welding ensures the service life of the machine and its service life will reach 8-10 years.
Energy saving:
1. The heating system is well-sealed, airtight, and fuel-efficient.
2. Exhaust gas will be recycled for reactor heating.
Good after-sales service:
1. Overseas tour guides install and train customer staff and try to run.
2. One year warranty.
Once this tire to oil recovery process is completed, the final product includes steel wire, carbon black and tire pyrolysis oil. This fuel oil is commonly used in industrial fuel materials for combustion only and even for further refining the product into diesel fuel. Specific the waste tyre recycling pyrolysis plant uses are as follows:
1. Fuel oil: Used in steel plants, boiler heating, heavy oil generators, cement plants.
2. Carbon black: Used for pressure ball combustion, or refined milling, which can be used as a new tire, rubber soles, pigment manufacturing materials.
3. Steel wire: It is mainly used for recycling or remelting.
4. Combustible gas: It will be recycled by the pyrolysis plant again, used for the heating material of the reactor, and it will save energy and reduce emissions.
At present, the technology of pyrolysis plant is very mature, but the market is not fully developed, so the market has broad prospects and is the best choice for your investment!
Know more detail information ,click to chat us online!
