What are the technical characteristics of waste plastic pyrolysis plant?

Henan Doing Machinery Equipment Co., Ltd. is a manufacturer dedicated to the research and development of environmentally friendly large and medium-sized renewable energy recycling and refining machinery and equipment. It has been the  best in the industry for its excellent products, sincere service and good reputation. The company has a research institute and a new product experimental base for the independent development of new products, and is constantly introducing and constantly updating. The waste plastic pyrolysis plant produced by DOING company has the following characteristics:

Safety:

A. The reactor of the waste plastic pyrolysis plant is automatically welded, which not only greatly improves the working efficiency but also ensures the quality of the welding, thus avoiding oil and gas leakage and causing an explosion.

B. Professional inspection technology further ensures perfect welding.

C. The vacuum device of waste plastic pyrolysis plant prevents oil and gas from flowing backwards and avoids safety hazards.

D. Ample safety devices such as thermometers, pressure gauges, safety valves, etc.

E. It is dangerous to burn off the exhaust from C1 to C4 without safety measures. In our waste plastic pyrolysis plant, this part of the exhaust gas first passes through a safety device and then enters the safety burner to ensure safe operation of the waste plastic pyrolysis plant before the exhaust gas burns.

Environmental protection:

A. Waste plastic film dedusting system-The professional water film dedusting system can make the flue gas meet international environmental standards.

B. Exhaust gas recycling, used to heat the reactor, no gas pollution, save fuel.

C. The reactor interface of the waste plastic pyrolysis plant is sealed with a professional sealing material to avoid leakage.

Long lasting:

A. Reactor material for waste plastic pyrolysis plant: It is made of special steel plate of Q245R with thickness of 16mm.
B. Welding: Automatic welding seam, to extend the service life of waste plastic pyrolysis plant  reactor to a large extent.
C. Waste plastic pyrolysis plant reactor has a service life of 8-10 years.

Energy saving:

A. The system is well sealed with no gas leakage and fuel savings.
B. Exhaust gas recycles the reaction kettle, saving fuel and saving costs.


Waste plastic pyrolysis plant working process:

The waste plastic is placed in the reactor of the waste plastic pyrolysis plant, and inside of the reactor is preheated in a sealed environment.

1. Solids (plastics) are propelled into the reactor of the waste plastic pyrolysis plant by an automatic feeder.

2. The reactor is heated by a spray gun and the cracking process begins when the temperature rises to the set temperature.

3. When the pyrolysis plant working process is stable, the tail gas is heated by the gas gun to heat the reactor.

4. After coming out of the reactor, the oil and gas enters the condenser and is then cooled.

5. The oil and gas enters the condenser, is cooled to oil, and the un-cooled gas is used for heating, providing utilization and reducing operating costs.

6. The solid residue is discharged from the lower part of the reactor and extracted by the carbon black hoist for use.

Waste plastic pyrolysis plant can effectively dispose of used plastics. Waste plastic pyrolysis plant uses waste plastic as raw material and undergoes a series of reactions after pyrolysis. The obtained products are pyrolysis oil and carbon black. The entire pyrolysis process is environmentally friendly and non-polluting.

Know more detail informations,please contact online!